HVAC control
AHU, FCU, chiller, VRF and ventilation control with schedules and setpoints.
BMS · Building Automation · Energy Management · Smart Buildings
A building management system (BMS) monitors and controls HVAC, lighting, pumps, energy meters and safety systems from one dashboard. Fluke Infotech designs and integrates BMS that cuts energy waste, alerts your facilities team before equipment fails and gives management clear reports.
- One dashboardHVAC, lighting, energy and security
- Open protocolsBACnet, Modbus and more
- RemoteMonitoring from anywhere
BMS scope
- HVAC, AHU, chiller and VRF control
- Lighting control and schedules
- Energy and utility metering
- Pump, tank and DG monitoring
- Fire, access and CCTV integration
- Remote dashboards and alarms
Run your building with data, not guesswork
Air conditioning and lighting are usually the largest energy costs in a commercial building, and much of that energy is wasted on empty floors and equipment running outside schedule. A BMS fixes that by controlling equipment on schedules, occupancy and real conditions.
We integrate equipment from different manufacturers using open protocols such as BACnet and Modbus, so you are not locked into one vendor. Alarms for high temperature, pump failure, water tank levels or DG faults reach your facilities team immediately.
Because Fluke Infotech also designs networks, servers and cybersecurity, your BMS is built on a secure, segmented network with proper back-up and remote access, instead of an isolated PC in a plant room.
BMS and building automation solutions
From monitoring-only systems to fully automated smart buildings.
Lighting control
Time, occupancy and daylight-based lighting control.
Energy management
Electrical, water and gas metering with consumption dashboards.
Utility monitoring
Pumps, tanks, DG sets, transformers and UPS status and alarms.
Security system integration
Fire alarm, access control and CCTV events on the BMS graphics.
Centralised building dashboards
One view across buildings, floors and sites.
Remote facility monitoring
Secure remote access and alerts by email, SMS or app.
Environmental monitoring
Temperature, humidity and leak sensors for critical rooms.
Data centre monitoringHigh energy bills? Equipment failing without warning?
We will audit your existing plant and controls and show where a BMS would pay back.
BMS in different buildings
Each building type has its own priorities for comfort, cost and safety.
Corporate offices
Floor-wise HVAC schedules, lighting control and energy dashboards for facility managers.
High-rise & commercial towers
Central plant, common-area lighting, pumps, lifts status and tenant energy metering.
Hotels & hospitality
Guest-room HVAC and lighting, kitchen ventilation, hot water and energy reporting per outlet.
Manufacturing plants
Utilities monitoring, compressed air and DG alarms, and energy metering by production line.
Top 10 BMS and automation brands
We integrate controllers and software from leading building automation vendors using open protocols.
Siemens
Desigo building automation
Schneider Electric
EcoStruxure Building Operation
Honeywell
Building management systems
Johnson Controls
Metasys BMS
Delta Controls
BACnet building controls
ABB
Building and KNX automation
Tridium
Niagara integration framework
Distech Controls
Open BACnet controllers
Trane
HVAC controls and Tracer systems
Carrier
Automated Logic and HVAC controls
Brand names and trademarks belong to their respective owners. We recommend brands on technical fit, local support and budget; authorised-partner status is confirmed per OEM on request.
Open, secure and maintainable
A BMS is only useful if your team can use it and it stays secure. We design with that in mind.
- Open protocols (BACnet, Modbus) to avoid vendor lock-in
- Points list and graphics agreed before installation
- BMS network segmented and protected by firewall
- Alarms prioritised so teams are not flooded
- Operator training and documentation at handover
Industries we serve
Corporate offices
Energy and comfort control.
Hotels
Guest comfort and utility costs.
Hospitals
Critical HVAC and medical utilities.
Data centres
Cooling and environment monitoring.
Malls & retail
Common-area HVAC and lighting.
Manufacturing
Utilities and energy metering.
Education
Campus-wide energy control.
Pharma
Clean-room conditions and alarms.
How we deliver BMS projects
- ConsultUnderstand the site, risks, users and compliance needs.
- Site surveyWalk the building or plant; record cable routes, power and mounting points.
- Design & BOQLayout drawings, device schedule and bill of quantities you can compare.
- OEM selection & procurementBrands chosen for your requirement and budget, sourced through proper channels.
- Install & integrateInstallation, cabling, configuration and integration with other systems.
- Test & commissionPoint-to-point testing, commissioning reports and user training.
- Handover & AMCAs-built drawings, documentation, then AMC and on-call support.
Why choose Fluke Infotech?
- IT-first integrator since 2013: ELV systems built on properly designed networks, storage and cabling
- One accountable partner for CCTV, access, fire, BMS, IT and electrical, with a single project plan
- Multi-OEM, vendor-neutral design chosen for your site, not for one brand's catalogue
- Documented handover: device schedules, IP plans, test reports and as-built drawings
- AMC, preventive maintenance and resident engineers after go-live
PAN-India coverage from Indore
Head office: 205, Orange Business Park, Bhawarkua, Indore 452001, Madhya Pradesh.
Project and service locations: Indore, Bhopal, Jabalpur, Delhi NCR, Mumbai, Pune, Nashik, Nagpur, Ahmedabad, Jaipur, Lucknow, Patna, Kolkata, Bhubaneswar, Hyderabad, Bengaluru and Chennai.
Call: +91-9966994420 · Email: sales@flukeinfotech.com · Support: support@flukeinfotech.com
Frequently asked questions: building management systems
What does a building management system control?
Typically HVAC, ventilation, lighting, pumps, tanks, DG sets and energy meters, plus integration with fire alarm, access control and CCTV.
Can a BMS reduce energy costs?
Yes. Scheduling, setpoint control and occupancy-based operation reduce energy waste. Savings depend on your building and current controls; we estimate them after an audit.
Can you integrate equipment from different brands?
Yes. We use open protocols such as BACnet and Modbus and integration platforms to bring different manufacturers onto one system.
Can we monitor the building remotely?
Yes. We set up secure remote access and alerts so your team can see status and alarms from anywhere.
Is a BMS suitable for an existing building?
Yes. Retrofit BMS is common. We start with monitoring and add control step by step to limit disruption.
Do you provide BMS maintenance?
Yes. We offer AMC covering controller health, sensor calibration checks, software updates and on-call support.
Make your building smarter
Share your drawings, BOQ or requirement and our engineers will come back with a site survey plan, design options and a clear quotation.
